Hot Melt Fusion Welding Method of Plastic is also called divided into semi -precision small medium -frequency point welding machines. Don't look at it small, but there are quite a lot of products that can be welded, such as iron, stainless steel, copper, silver, platinum, titanium, and titanium. Tungsten workpiece is welded and has many shapes. When we want to change the material or shape, we have to replace the electrodes to adapt to the welding workpiece.

This involves the steps of how to replace the electrode, and its operation is as follows:

1. Direction adjustment: first use a wrench to loosen the lock screw, then adjust the angle and height, until the appropriate position, and finally lock the screw;

2. Adjust the electrode head height: First adjust the screw with the height of the electrode head, and then adjust or change the length of the electrode head to expose the electrode (too long electrode head is easy to deform) to lock the screw.

3. Adjust the width of the electrode head welding point: then adjust the electrode solder joints according to the size of the welded carrier. You can use sandpaper to polish.

4. The height adjustment of the storage table: first loosen the bar screw of the wrench, and then the workpiece to be touched by the welding is adjusted to the distance with the electrode, and the screw is locked.

hot melt fusion welding method of plastic https://www.dowelding.com/5-Popular-Plastic-Fusion-Welding-Methods-Today.html